- 12
- Jan
6S 22.2V 30Ah Vtol Drone Battery High Energy Density
https://youtu.be/E2qGi6P9-sE
Product Detail
| Specification | The specific parameters |
| Nominal voltage（V ） | 22.2 |
| Working voltage（V ） | 25.2~16.8 |
| Capacity（mAh） | 30000 |
| Size（mm,max） | 213*91*70 |
| Weight（kg, max） | 2.65 |
| Energy density( Wh/kg ) | 252 |
| Maximum continuous charging current（A） | 60 |
| Maximum continuous discharge current（A） | 150 |
| Charging Operating Temperature（℃） | 0~45 |
| Discharge operating temperature（℃） | -20~55 |
| Cycle life（cycles@0.5C） | 1200 |
Can be compatible for most 6S LIPO on the market like the Tattu Battery
6 s 22.2 volts
Super High Energy Density
Much Higher Safety than normal LIPO and Li Ion
5 c grade for continuous discharging
Lifetime warranty
2C Quick charging capacity
waterproof
Built with 100% fresh batteries
Engineering drawings are available upon request
Made of high-grade silicone sheath line. The wire gauge is determined by plug selection.
We added connectors and JST-XH balance connectors
Battery Discharging Curve
Battery Charge Curve
Battery Low Temperature Discharging Curve
4.55℃ High Temperature Discharging Performance
If you want to know more details for the Solid State Drone Batteries you can check for this:
We can supply any connector and wire gauge you like for balance tap and main connector. The battery can also be used as a “smart battery” with a built-in BMS and a hard case. We can also supply batteries of any voltage or capacity you need, as they are assembled and ordered in the United States. Custom configurations are available upon request. Contact us via live help, email info@linkagepower.com or by phone at +86 15919976170 with your specific requirements.